Drains Cleared
Blocked outside drain being cleared with professional equipment

Blocked Drains in Street, Somerset

Unlike generic plumbers, Drains Cleared specialises exclusively in blocked-drain recovery — our vans carry 4000psi jetters and CCTV as standard, not as an upsell. Serving BA16, BA17, BA18, BA19.
BA16BA17BA18BA19
Get your free quote
We route to vetted local engineers covering BA16, BA17, BA18 and BA19 with a 60-minute response target for drain emergencies across Street and the surrounding area.

Blocked Drains in Street

Street's separate sewerage infrastructure—foul and surface water in distinct pipelines—generates specific blockage patterns across its Victorian, Edwardian and modern housing mix. Properties in postcodes BA16, BA17, BA18 and BA19 face misconnection-induced blockages and buildup on clay soil pipes typical of 1880–1930 construction, compounded by Wessex Water's hard mineral deposits that coat pipe walls.

Blocked drains in Street result from misconnections (washing machines into surface drains), clay pipe collapse in Victorian homes, and hard water scale reducing bore. Street's separate sewer system means blockages discharge into gardens during heavy rainfall.

Drainage in Street — what local engineers know

Somerset County Council manages Street's two-pipe sewer system serving 10,000 residents. The primary blockage driver is misconnection: washing machine waste plumbed into surface water drains rather than foul sewers causes discharge failures when surface flow peaks during rain. Clay soil pipes in Victorian Street properties develop root ingress and lime mortar joint collapse, narrowing bores to partial blockages. Wessex Water's hard supply deposits mineral scale on pipe interiors, reducing bore substantially over 15 years and accelerating fat and wet wipe accumulation. Street's separation system means blockages remain surface-visible, making remediation straightforward compared to combined-sewer areas.

  • Hard water supply causes limescale accumulation in boilers, radiators and soil pipe joints — powerflush and descaling demand is high across Street
  • Separate sewer system across most of Street: misconnections (e.g. washing machines plumbed into surface water drains) are a known local issue and can result in environmental enforcement action
  • Ageing infrastructure in parts of Street means drain blockages from grease, wipes and root ingress remain the most common call-out reasons
  • With a significant share of properties built before 1920, salt-glazed clay drainage and lead-solder copper pipework are common — pipe collapse, root ingress and joint failure are recurring call-out drivers.
  • Street has Environment Agency flood warning areas nearby along the Bristol Channel corridor — basement and ground-floor properties can face sewer backflow during heavy rain; non-return valves are strongly recommended.

What happens when you contact us in Street

  1. 1 Immediate dispatch. We find the nearest available engineer covering BA16/BA17 and confirm the ETA before the call ends.
  2. 2 On-site diagnosis — no guessing. The engineer inspects using professional-grade equipment including CCTV where needed and quotes a fixed price before work starts.
  3. 3 Job complete, report issued. You receive a written completion report. All work is guaranteed — same fault returns within the guarantee period, we come back free.

Who's responsible for drains in Street?

In Street, responsibility for a blocked or damaged drain depends on where the fault sits. As a homeowner you are responsible for the drains within your property boundary that serve only your home. Since the 2011 private sewer transfer, Wessex Water is responsible for shared sewers and lateral drains beyond your boundary — even where they run under private land. Road gullies and highway drainage are maintained by Somerset.

This matters because it determines who pays. If our engineer's CCTV inspection shows the fault is in a shared sewer, we'll tell you — and you can report it to Wessex Water rather than paying for the repair yourself. The separate sewer layout that dominates Street affects where these boundaries typically fall, and our local engineers know the BA16, BA17, BA18 networks well enough to identify ownership quickly.

Blocked Drains prices in Street

Every Street job is quoted as a fixed price before work starts — what we quote is what you pay, with no call-out fee for providing the quote. However, the final price depends on access (an external inspection chamber is quicker than internal-only access), the pipe material and condition , and how established the blockage or fault is. Request your free quote and we'll confirm the price and your engineer's ETA in the callback.

In summary, Blocked Drains in Street is backed by a 12-month workmanship guarantee. Furthermore, every job includes a written completion report. Consequently, you have full documentation if the same fault recurs.

About drainage in Street

Local facts our engineers use when they arrive.

Population
10,000
Postcode districts
BA16BA17BA18BA19
Council
Somerset
Water authority
Wessex Water
Flood risk
High — affected watercourses: Bristol Channel, River Brue, Glastonbury Millstream
Property mix
Victorian Notable share
Edwardian Notable share
Interwar Notable share
Postwar Large share
Modern Notable share
Sewer type separate
Common local issues
Hard water supply causes limescale accumulation in boilers, radiators and soil pipe joints — powerflush and descaling demand is high across StreetSeparate sewer system across most of Street: misconnections (e.g. washing machines plumbed into surface water drains) are a known local issue and can result in environmental enforcement actionAgeing infrastructure in parts of Street means drain blockages from grease, wipes and root ingress remain the most common call-out reasonsWith a significant share of properties built before 1920, salt-glazed clay drainage and lead-solder copper pipework are common — pipe collapse, root ingress and joint failure are recurring call-out drivers.Street has Environment Agency flood warning areas nearby along the Bristol Channel corridor — basement and ground-floor properties can face sewer backflow during heavy rain; non-return valves are strongly recommended.

This information helps our engineers arrive prepared.

Illustrative example of typical work

Surface Drain Misconnection Removal in Street (BA17 1EW)

Area:
Street
Service:
Blocked Drain Clearance

A Victorian terrace in Street (BA17 1EW) experienced recurring garden flooding and raw sewage discharge to the surface gully. Investigation revealed the washing machine drain had been plumbed into the surface water system instead of the foul sewer—a misconnection that violated Environment Agency regulations. Rerouting the machine outlet to the foul sewer and flushing the surface drain restored normal function and eliminated the enforcement risk.

This describes typical work performed by engineers in our network. Names and specific details have been omitted to protect customer privacy.

Blocked Drains in Street — FAQs

What is a misconnection and why does Street see so many?
Street's separate sewer system uses two pipes: one for foul water, one for surface runoff. A misconnection occurs when washing machines, kitchen sinks or toilets discharge into the surface drain by mistake. This causes surface gullies to overflow with foul water. Street's Victorian housing stock makes misconnections common during DIY plumbing work.
How do I know if my Street property has a misconnection?
Signs include foul smell from surface gullies, raw sewage in the garden during heavy rain, or isolation of a drain after flooding. Environment Agency inspections detect misconnections via dye tests. Rectification requires rerouting the offending pipe to the foul sewer.
Why do Victorian clay pipes in Street block more easily?
Clay soil pipes in Victorian Street properties (1880–1930) have wider internal diameters (4–6 inches) but develop joint collapse from ground settlement and lime mortar degradation. Root systems enter the cracks, narrowing the bore. Hard water mineral deposits further reduce flow, making fat and wipe accumulation likely.
Does Wessex Water's hard supply cause drain blockages?
Hard water deposits 2–3mm of mineral scale on foul pipe interiors every 10 years in Street. This reduces bore width, increasing blockage risk from fat, wet wipes and hair. Properties in BA16–BA19 see faster blockage recurrence than UK average.
How quickly can you clear my blocked drain?
Most urban jobs are attended within 60 minutes, and the majority of blockages are cleared within the first hour on site.
What does it cost to unblock a drain?
Our standard blocked-drain callout starts at a fixed fee with no hidden extras. We quote before we start and only charge for the work we actually do.
Do you guarantee the work?
Yes. Every clearance comes with a written guarantee. If the same blockage returns within the guarantee period we return free of charge.
What causes most blocked drains?
The three biggest culprits are fats, oils and grease from kitchens; wet-wipes and sanitary items flushed down toilets; and root ingress from nearby trees into older clay pipework.

Other services available in Street

Blocked Drains near Street

We cover towns within and around Street. Click a town to see local engineer availability.

Our Street service area

We route to vetted local engineers covering BA16, BA17, BA18 and BA19 with a 60-minute response target for drain emergencies across Street and the surrounding area. We attend callouts across the BA16, BA17, BA18, BA19 postcode districts. Nearby coverage includes Wells, Shepton Mallet, Bridgwater, Yeovil, Taunton.

View Street on Google Maps

Ready to book in Street?

We route to vetted local engineers covering BA16, BA17, BA18 and BA19 with a 60-minute response target for drain emergencies across Street and the surrounding area.

Get your free quote