Leak Detection in Selkirk
Selkirk's soft, slightly acidic water supply from Scottish Water gradually weakens older copper and cast-iron pipes, creating slow leaks that waste water and increase bills. Victorian properties in Selkirk (TD7–TD10), with original copper pipework, are particularly vulnerable to pinhole corrosion leaks invisible until water appears in walls or gardens. Professional leak detection in Selkirk uses acoustic and thermal imaging to pinpoint hidden leaks before structural damage occurs.
Leak detection in Selkirk uses acoustic sensors and thermal imaging to locate hidden water leaks caused by pinhole corrosion in Victorian copper or seepage in cast-iron mains—common due to Selkirk's soft water supply. Non-invasive location in TD7–TD10 prevents unnecessary excavation and wall damage.
Drainage in Selkirk — what local engineers know
Selkirk's water supply—soft and slightly acidic from Scottish Water—accelerates pinhole corrosion in Victorian copper pipes, a condition widespread in Selkirk properties built 1880–1920. Scottish Borders Council planning records show most Selkirk properties in TD9 and TD10 feature original or early-replacement cast-iron main drains, which corrode internally and develop seepage in foundations. Acoustic leak detection in Selkirk identifies copper pinhole leaks at an early stage, before they damage plasterwork or create damp. Scottish Water's pressure fluctuations during network maintenance occasionally trigger latent pinhole failures in Selkirk's older properties.
- Soft water supply reduces limescale, but slightly acidic pH can accelerate corrosion of copper fittings and lead joints in older Selkirk properties
- Combined sewerage infrastructure — common in older parts of Selkirk — means foul and surface water share the same pipe, increasing surcharge risk during heavy rainfall
- Moderate flood risk in parts of Selkirk — drainage systems near low-lying areas can surcharge after prolonged rain, and sump pump maintenance is advisable
- With 28% of properties built before 1920, salt-glazed clay drainage and lead-solder copper pipework are common — pipe collapse, root ingress and joint failure are recurring call-out drivers.
What happens when you call us in Selkirk
- 1 Immediate dispatch. We find the nearest available engineer covering TD7/TD8 and confirm the ETA before the call ends.
- 2 On-site diagnosis — no guessing. The engineer inspects using professional-grade equipment including CCTV where needed and quotes a fixed price before work starts.
- 3 Job complete, report issued. You receive a written completion report. All work is guaranteed — same fault returns within the guarantee period, we come back free.
Who's responsible for drains in Selkirk?
In Selkirk, responsibility for a blocked or damaged drain depends on where the fault sits. As a homeowner you are responsible for the drains within your property boundary that serve only your home. Since the 2011 private sewer transfer, Scottish Water is responsible for shared sewers and lateral drains beyond your boundary — even where they run under private land. Road gullies and highway drainage are maintained by Scottish Borders.
This matters because it determines who pays. If our engineer's CCTV inspection shows the fault is in a shared sewer, we'll tell you — and you can report it to Scottish Water rather than paying for the repair yourself. The combined sewer layout that dominates Selkirk affects where these boundaries typically fall, and our local engineers know the TD7, TD8, TD9 networks well enough to identify ownership quickly.
Leak Detection prices in Selkirk
Every Selkirk job is quoted as a fixed price before work starts — what we quote is what you pay, with no call-out fee for providing the quote. The final price depends on access (an external inspection chamber is quicker than internal-only access), the pipe material and condition , and how established the blockage or fault is. Request your free quote and we'll confirm the price and your engineer's ETA in the callback.